Home » Systems and Approvals

Systems and Approvals

These are our Aqua-nova® systems, listed by tank type. Click the link to view the relevant PDF document, or right click the link, and select Save link as… For further information or any queries, please contact your local council or us on 13 19 26.


Aqua-nova® Systems in Australia

Standard  |  Advanced  |  Nutrient Reduction  |  Membrane Series  |  Bed & Breakfast

Standard Systems

The Standard Aqua-nova® system has been designed for simple and efficient operation. It provides aerated wastewater treatment through a multi-stage digestion process using naturally occuring bacteria and enzymes. The system is designed to use minimum power, resulting in low cost operation and maximum savings.

Standard polymer Aqua-nova® systems are available across Australia. Our concrete systems are available across select states. See below for our selection of State approvals, or contact us for further information.

Approvals
STATE QLD  NSW + ACT  NT  SA  WA  VIC 
 Concrete System 10100 (13EP) PDF Contact us for information Not available Not available Not available Not available
Polymer System 80100 (13EP)
PDF
PDF PDF PDF PDF PDF

Advanced Systems

Advanced Aqua-nova® systems are available in Queensland, where a higher level of water quality may be required. See below for our selection of State approvals, or contact us for further information.

Approvals
 STATE QLD
 Polymer System 80100Z (13EP) PDF
Concrete System 10100Z (13EP) PDF

Nutrient Reduction Systems

The Aqua-nova® Nutrient Reduction system is a trouble-free, robust system that can be used in new or existing developments located within water catchments or when encroaching into environmentally sensitive areas. Using the Aqua-nova NR allows you to have greater flexibility with small blocks by reducing set back distances and reduced dispersal areas.

The Aqua-nova® NR operates with a dual recycle and cycling aeration, allowing for the reduction of nitrogen, while a zeolite filter is fitted for reduction of phosphorus. The cycling process makes the system a more energy efficient aeration system than most other systems on the market. See below for our selection of State approvals, or contact us for further information.

Approvals
 STATE QLD NSW
 Polymer System (8 EP) PDF PDF

Membrane Series Systems

The Aqua-nova® Membrane series uses a two tank system with a filter fitted for the removal of grease/oils and particulate matter that may damage membranes. This system can be used in new or existing developments located within water catchments or when encroaching into environmentally sensitive areas. Using the Aqua-nova® MBR allows you to have greater flexibility with small blocks by reducing set back distances and reduced dispersal areas.

The unique design includes the use of a smaller air blower that consumes less than 70% of the power of other membrane systems, and has a distinctive pumping system that in suitable environments, can make large irrigation pumps redundant. A large balance volume reduces the impact of hydraulic surges, providing more flexible use of water in the household. The MR system allows for the production of exceptionally high water quality, allowing for UV disinfection prior to irrigation. See below for our selection of State approvals, or contact us for further information.

Approvals
 STATE QLD NSW
 Polymer System MBR 10 PDF  MBR PDF

Bed & Breakfast Systems

The Aqua-nova® Bed and Breakfast systems are higher capacities designed for small commercial use. See below for our selection of State approvals, or contact us for further information.

Approvals
 QLD Standard  Advanced 
 Concrete 10114 PDF 10114Z PDF
 Polymer  80203 PDF   80203Z PDF


Share this: Email


Go Back